4.0291Retrofit-Spotlight

For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands.

Description

  • Protection class IP68 – up to 5m water depth
  • Entirely made of stainless steel 316Ti 1.4571, epolished
  • Round attachment cover, made of stainless steel 316Ti, height 13 mm
  • POW-LED cold white, warm white, neutral white
  • POW-LED royal blue
  • Multichip POW-LED RGB-W
  • operating mode: constant current
  • temperature controlled (onboard)
  • surge protection
  • light distribution especially for swimming pool lighting "asymmetric Mixflux"
  • Constant-current power source/RGB-W-controller ordered separately
  • Supplied without cable

Notes/Options

  • Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool.
  • Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions.
  • In case of retrofitting to RGB-W version, the cable must be replaced with special underwater cable (9.6150.04.41).
  • Existing transformers must be replaced by appropriate power supply units and RGBW-controllers.
  • Version for saline water see page
  • POW-LED with beam angle spot 15°, medium 30°, medium flood 45°; flood 120°, asymmetric and elliptical 15x50° on request
  • POW-LED monochrome, single colour in green, red, amber, blue, capri blue, 2700K
  • Individual configuration of the LED multichips possible

Accessories / Housings

9.6150.02.25

  • Special underwater cable
  • per m, 2 x 2,5 qmm, ø 8 mm

9.6150.04.41

  • Special underwater cable
  • per m, 1x4 + 4x1 + 2x0,25 qmm, ø 10.7 mm

9.6150.02.40

  • Special underwater cable
  • par m, 2 x 4 qmm, ø 9,7 mm

5.0670.09.65

  • DMX-Dongle
  • load resistance 120 Ohm

9.0274.00.10

  • Fixation bracket
  • for built-in pot 4.0274 (Spotlight 4.0271, 4.0272, 4.0291)

9.0630.65.12

  • mounting housing
  • plastic, IP65, with 2 in/1 out, transparent cover,
  • suitable for power supply 5.0630.01.12 and RGB-W Controller 5.0630.09.52
Article number Lamps Lumen Light colour Wattage Current Radation angle UW-Cable, installs
Versions: Underwater environments only
Standard version - Retrofit installation for installation housing 4.0274/4.0268
4.0291.00.11 12 POW-LED 6900 lm 6000K cold white total 47 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.00.12 12 POW-LED 5640 lm 3000K warm white total 47 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.00.13 12 POW-LED 6036 lm 4500K neutral white total 47 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.00.16 48 POW-LED 500mW/LED royal blue 450 nm total 49,5 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.00.41 12 Multichip POW-LED cold white: 2100 lm RGB-CW cold white 6000K all on 75 W CC 1400mA @12 V-DC asymmetrisch Mixflux UW, 1x4,0 + 4x1,0 + 2x0,25 qmm
Flush mounted version - Retrofit installation for installation housing 4.0274.75
4.0291.75.11 12 POW-LED 6900 lm 6000K cold white total 47 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.75.12 12 POW-LED 5640 lm 3000K warm white total 47 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.75.13 12 POW-LED 6036 lm 4500K neutral white total 47 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.75.16 48 POW-LED 500mW/LED royal blue 450 nm total 49,5 W CC 3600mA @12 V-DC asymmetrisch Mixflux UW, 2x2,5 qmm
4.0291.75.41 12 Multichip POW-LED cold white: 2100 lm RGB-CW cold white 6000K all on 75 W CC 1400mA @12 V-DC asymmetrisch Mixflux UW, 1x4,0 + 4x1,0 + 2x0,25 qmm