4.0291.00.41 Retrofit-Spotlight Serie 4.0291 Standard | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 258 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.00.42 Retrofit-Spotlight Serie 4.0291 Standard | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 258 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.00.43 Retrofit-Spotlight Serie 4.0291 Standard | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 258 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.57.41 Swimmingpool-Light Serie 4.0291.57 Retrofit installation on the pool wall | with plastic component | Protection system IP68 | 316Ti Stainless Steel 1.4571 | 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (10 m) For retrofit installation on the pool wall. For illumination medium and large swimming pools. ----- Generel data product 4.0291.57 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm · with a moulded plastic component for retrofit installation on the pool wall ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 10 m of special underwater cable 12.07.2017 4.0291.57.42 Swimmingpool-Light Serie 4.0291.57 Retrofit installation on the pool wall | with plastic component | Protection system IP68 | 316Ti Stainless Steel 1.4571 | 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (10 m) For retrofit installation on the pool wall. For illumination medium and large swimming pools. ----- Generel data product 4.0291.57 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm · with a moulded plastic component for retrofit installation on the pool wall ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 10 m of special underwater cable 12.07.2017 4.0291.57.43 Swimmingpool-Light Serie 4.0291.57 Retrofit installation on the pool wall | with plastic component | Protection system IP68 | 316Ti Stainless Steel 1.4571 | 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (10 m) For retrofit installation on the pool wall. For illumination medium and large swimming pools. ----- Generel data product 4.0291.57 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm · with a moulded plastic component for retrofit installation on the pool wall ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 10 m of special underwater cable 12.07.2017 4.0291.58.41 Swimmingpool-Light Serie 4.0291.58 Retrofit installation on the pool wall | to hang in, with plastic component | Protection system IP68 | 316Ti Stainless Steel 1.4571 | 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (10 m) For retrofit installation on the pool wall. For illumination medium and large swimming pools. ----- Generel data product 4.0291.58 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm · with a moulded plastic component for retrofit installation or flexible use on the edge of the pool ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 10 m of special underwater cable 12.07.2017 4.0291.58.42 Swimmingpool-Light Serie 4.0291.58 Retrofit installation on the pool wall | to hang in, with plastic component | Protection system IP68 | 316Ti Stainless Steel 1.4571 | 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (10 m) For retrofit installation on the pool wall. For illumination medium and large swimming pools. ----- Generel data product 4.0291.58 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm · with a moulded plastic component for retrofit installation or flexible use on the edge of the pool ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 10 m of special underwater cable 12.07.2017 4.0291.58.43 Swimmingpool-Light Serie 4.0291.58 Retrofit installation on the pool wall | to hang in, with plastic component | Protection system IP68 | 316Ti Stainless Steel 1.4571 | 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (10 m) For retrofit installation on the pool wall. For illumination medium and large swimming pools. ----- Generel data product 4.0291.58 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm · with a moulded plastic component for retrofit installation or flexible use on the edge of the pool ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 10 m of special underwater cable 12.07.2017 4.0291.73.41 Retrofit-Spotlight Serie 4.0291.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 258 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Saline version. For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.73.42 Retrofit-Spotlight Serie 4.0291.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 258 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Saline version. For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.73.43 Retrofit-Spotlight Serie 4.0291.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 258 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Saline version. For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.75.41 Retrofit-Spotlight Serie 4.0291 Flush Version | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 238 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.75.42 Retrofit-Spotlight Serie 4.0291 Flush Version | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 238 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.75.43 Retrofit-Spotlight Serie 4.0291 Flush Version | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 238 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.78.41 Retrofit-Spotlight Serie 4.0291.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 238 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Saline version. For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.78.42 Retrofit-Spotlight Serie 4.0291.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 238 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Saline version. For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0291.78.43 Retrofit-Spotlight Serie 4.0291.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 238 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (excl.) Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with a 5-pin special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGB controllers. Saline version. For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 13 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Supplied without cable 12.07.2017 4.0292.00.41 Swimmingpool-Light Serie 4.0292 Standard | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 230 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (5 m) Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected to the connection box without opening the spotlight. Matching installation housing should be selected, depending on the installation type and situation. Version for saline water see page For illumination medium and large swimming pools. ----- Generel data product 4.0292 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 5 m of special underwater cable 12.07.2017 4.0292.00.42 Swimmingpool-Light Serie 4.0292 Standard | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 230 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (5 m) Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected to the connection box without opening the spotlight. Matching installation housing should be selected, depending on the installation type and situation. Version for saline water see page For illumination medium and large swimming pools. ----- Generel data product 4.0292 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 5 m of special underwater cable 12.07.2017 4.0292.00.43 Swimmingpool-Light Serie 4.0292 Standard | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 230 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (5 m) Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected to the connection box without opening the spotlight. Matching installation housing should be selected, depending on the installation type and situation. Version for saline water see page For illumination medium and large swimming pools. ----- Generel data product 4.0292 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 2 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 316Ti with 1.5 m cable protection tube · Supplied with 5 m of special underwater cable 12.07.2017 4.0292.73.41 Swimmingpool-Light Serie 4.0292.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 230 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-CW cold white 6000K | cold white: 2100 lm | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (5 m) Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected to the connection box without opening the spotlight. Matching installation housing should be selected, depending on the installation type and situation. Saline version. For illumination medium and large swimming pools. ----- Generel data product 4.0292.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 2 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 904L with 1.5 m cable protection tube · Supplied with 5 m of special underwater cable 12.07.2017 4.0292.73.42 Swimmingpool-Light Serie 4.0292.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 230 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-WW warm white 3000K | warm white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (5 m) Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected to the connection box without opening the spotlight. Matching installation housing should be selected, depending on the installation type and situation. Saline version. For illumination medium and large swimming pools. ----- Generel data product 4.0292.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 2 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 904L with 1.5 m cable protection tube · Supplied with 5 m of special underwater cable 12.07.2017 4.0292.73.43 Swimmingpool-Light Serie 4.0292.73 Saline-Version | Protection system IP68 | 904L Stainless Steel 1.4539 | ø 230 mm 12 Multichip POW-LED | all on 75 W | 12 V-DC | | RGB-NW neutral white 4500K | neutral white: -- | asymmetrisch Mixflux | Cable: UW, 1x4,0 + 4x1,0 + 2x0,25 qmm (5 m) Spotlights can (according to prior agreement) also be supplied without the connected cable to simplify installation with large cable lengths (up to max. 40m). The cable can be connected to the connection box without opening the spotlight. Matching installation housing should be selected, depending on the installation type and situation. Saline version. For illumination medium and large swimming pools. ----- Generel data product 4.0292.73 · Protection class IP68 – up to 5m water depth · special corrosion-proof version made marine grade 904L stainless steel 1.4539 · for pools with increased saltwater concentration (up to 3.5 %) · Round attachment cover, made of stainless steel 904L, height 2 mm ··· · POW-LED white 12 V-DC · POW-LED royal blue 12 V-DC · Multichip POW-LED RGB-W 12 V-DC · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB controller ordered separately · Installation housing made of stainless steel 904L with 1.5 m cable protection tube · Supplied with 5 m of special underwater cable 12.07.2017