4.0291.75.13 Retrofit-Spotlight Serie 4.0291 Flush Version | Protection system IP68 | 316Ti Stainless Steel 1.4571 | ø 238 mm 12 POW-LED | total 47 W | CC 3600mA @12 V-DC | | 4500K neutral white | 6036 lm | asymmetrisch Mixflux | Cable: UW, 2x2,5 qmm (excl.) | Versions with plastic component for retrofit installations available. For wall installation or flexible use on the edge of the pool. Spotlights without connected cable for simple retrofitting of halogen to POW LED with use of the existing 2-pin cable (Only monochrome, cross section min. 2x2.5qmm). The cable can be connected to the connection box without opening the spotlight. Always observe the separate manual instructions. In case of retrofitting to RGB-W version, the cable must be replaced with special underwater cable (9.6150.04.41). Existing transformers must be replaced by appropriate power supply units and RGBW-controllers. Version for saline water see page For retrofitting in existing swimming pools with existing WIBRE installation housing. As Retrofit for many other brands. ----- Generel data product 4.0291 · Protection class IP68 – up to 5m water depth · Entirely made of stainless steel 316Ti 1.4571, epolished · Round attachment cover, made of stainless steel 316Ti, height 13 mm ··· · POW-LED cold white, warm white, neutral white · POW-LED royal blue · Multichip POW-LED RGB-W · operating mode: constant current · temperature controlled (onboard) · surge protection · light distribution especially for swimming pool lighting "asymmetric Mixflux" ··· · Constant-current power source/RGB-W-controller ordered separately · Supplied without cable 02.01.2019